Description

Safety Information
1. Buyers need to have a certain level of electronic knowledge and relevant hands-on ability.
2. Before connecting the circuit board bus plug, make sure to check each wire connection is correct. The insulation between the base plate and the battery connection terminal is required to prevent burning.
3. Each of our circuit boards undergoes strict quality testing. If the circuit board is burned due to buyer’s incorrect operation, the buyer will be responsible.

Wiring Precautions Of Capacitor Balancer

Wiring Precautions
1. Firstly, solder the wires of each battery. The color of each wire has no special meaning. Please solder the wires in the order of B- to B1, B2, B3. It is prohibited to insert the bus into the circuit board until all the wires are soldered and checked without errors.
2. Pay attention to the B- wire connecting to the total negative pole of the battery pack, B1 wire connecting to the positive pole of the 1st battery, B2 wire connecting to the positive pole of the 2nd battery, B3 wire connecting to the positive pole of the 3rd battery, and so on (please refer to the wiring diagram for the correct connections).
3. Please note that the number of batteries in your battery pack must match the number of batteries supported by the balance board. For example, for a 6S-8S, only connect 6, 7, or 8 batteries.
4. If you purchased a 6S-8S balance board but only connect 6 batteries, simply follow the steps in the 2nd point to connect all 6 batteries. The remaining B7 and B8 wires must be insulated and do not need to be connected.
5. Before connecting the balance board bus plug, make sure to check each wire connection is correct. The insulation between the base plate and the battery connection terminal is required to prevent burning.